Therwen 30 Pcs Name Plates Laser Engraved Brushed Stainless Steel Plate Personalized Plaque Blank Custom Name Tag Frame Label with Adhesive Backing(Multi Shape,1''x 3'')

I’ve tried a competitors nameplates that look identical to these in photos but they are vastly different. The other ones were super thin like aluminum. The silver ones required the use of a black laser marking spray to engrave (which is $23 for an 2oz bottle).These however are thicker and heavier so they feel like better quality, and the silver ones engrave perfectly without the need for spray which is a big plus! (The photo I posted was after I wiped it down with alcohol so that black is there to stay!) They do warp a little like others have said but it’s easy to bend them back straight afterwards. I’m sure there are tricks for avoiding that.

Overall, this product did exactly what I needed to.Had trophies made and needed a name plate. After searching I settled on these. They DO bend and warp a bit when laser engraving, but were easily flattened back out.Only had to do 1 run for the design to show up in the material. Using an x tool m1

They work but they are hard to engrave with laser, due to the bend from the heat very easily

Used for engraving - looks nice

I put these on tiny little lockers I personalized. Love them!

I have a 20w fiber laser. I did the gold one and I thought wow, this turned out great. It was black. Several hours later, I went to do another gold one, same settings everything and it barely left a mark. So I ran it a few times, could not get it to mark, even moving my laser closer to the engraving surface. Then I noticed, the one I did earlier, looked like it rusted, when I had it perfectly black.So then I tried the black one, kept getting a rainbow color, so upon suggestions in a laser group, I moved the laser up out of focus a few mm and increased speed, then I got a black one that went from copper colored to pink, ran it a few times and always the samething. Now the silver ones where the best. I personally wouldn't buy these again.My settings for the silver ones with a 20w commarker was 2000 speed/100 power/45freq and defocus( laser up 3mm) with a hatch of .004mmRun 2 timesFor white on the black(which took forever)Same as silver settings except a hatch of .001 ran 2 times. But let cool down.I do have to say that these settings are still not consistent with each plate.

I was using these with a 10 watt diode (dual 5 watt), and required cranking up the power to 100%, and run at 25mm/s to get a good mark. However that caused the plates to warp dramatically. I ended up having to burn 4 plates at once, one letter per plate, at a time, with magnets used to hold things down, and a fan blowing to try and keep them cool. The project ended up taking hours, instead of minutes, because I had to go one letter at a time! Sadly I needed something quick, and these were really all I could find, so I had to make them work. Customer was happy in the end, but I lost money with all the lost time.

Minus ⭐: Waisted timeMinus ⭐: Waisted moneyProduct tittle states solid brass plate. It is actually stainless steal. I should've read every little detail before ordering. However, I normally do not order from sellers that have conflicting item descriptions. This is unusual for product on Amazon. Now my trust while shopping on Amazon has lessened. I'm going to keep the product- no refund necessary because it was my fault for falling for it. Hope my review will keep someone else from wasting their money, if you're looking for brass name plates.+3 stars⭐-shipping was SUPER fast⭐-the stainless steel tags are nice⭐-the adhesive is very good

El terminado es algo rústico y filoso, se agradece el pegamento.

There is no brass to be found on this product, not even brass plate. Certainly not "solid brass" as stated in the header, and not "stainless steel" as stated in the description. The base material is aluminium as it is easy to file as shown in the photo. You can also see where I scratched the surface to see if there was brass plate under the "coating" I am not sure what the coating is but it is not an anodized surface as that would result in white letters. The numbers you see (if you look closely) were the seeped/power% I used using a 22 watt diode laser. I am not sure what sort of laser these would work with but mine warped the plate. I suppose if they cannot write a grammatically correct description...the accuracy is bound to be suspect.

I bought this product for sublimation as described but it doesn't work for sublimation.